How to optimize operations of Motor Grader

 

The caterpillar motor grader plays an essential role in building and maintaining roads by performing critical tasks throughout the process. Through the utilization of a huge selection of work tools and attachments, motor graders can be fitted to perform grading, evaluating and finishing, ditch, and slope work ripping, scarifying, and even roadwork and snow removal.

Caterpillar graders commonly have the features such as grade-control technology to ensure predictable, load-sensing hydraulics, smooth and consistent performance, and accurate grading. When you invest in caterpillar motor graders for sale, it is really important to carefully analyze your needs based on the type of tasks and your demands, from the width of the blade and what is the power rating to the model age and what are the available technologies. You having a clear understanding of what is required will help you find the most efficient equipment.

During the operating motor grader, the operating speed of the grader has highly affected by the quality of tasks, so there should be no hurry while the operator doing ditching and blading. Because higher speed sometimes causes the grader to bounce and gauge the surface rather than smooth smoothen it. In extreme cases sometimes bouncing of grader can cause the operator to lose control of equipment and producing a potential accident situation, so the machine should be in control generally 3 mph to 5 mph.

When you using the ripper, you need to lower the teeth into the ground with the motor grader in motion, and if the rear wheel loses traction so the operator should be raised the ripper until the wheel regain traction.  The wheel should always be leaned in the direction when you turning around the motor grader, in which the turn is being made. This will help the operator to turn the motor grader with ease.

The moldboard of the caterpillar motor grader should always be incorrectly positioned, and for light and free lowing the material the angles of moldboard must be from 10 to 30 degrees when you processing of material like sticky and wet, and the operator should use higher moldboard degree from 30 to 50 when mixing large windrows and ditching is required.

The mantra is that it should be always kept straight up and rolling the grader blade forward to make the edge blunt. This also results in the best rear visibility and the operator can finish the task in the easiest way.

Actually, the applications of grading equipment in the construction sites, those must be done with that motor grader which has an engine of hydraulic with cooling fans that improve the cooling performance of the unit grader while you operating it in hottest weather, with the help of cooling fans prevent the machine from getting overheated. So when you buy this heavy equipment for sale and operate it, you should have all knowledge of operating motor grader.